what does automatic dispensing machine equipment maintenance need to do?-ag亚洲国际厅

the daily maintenance of the automatic dispensing machine is related to its service life. after the daily operation of the automatic dispensing machine, the daily maintenance machine should be done. how to maintain the automatic dispensing machine? the following is xinghua wisdom to teach you the correct daily maintenance steps:

1. replace the rubber and clean the pipe. at this time, first close the supply valve, open the discharge valve, discharge the remaining rubber material from the rubber barrel, close the discharge valve, open the supply valve, inject the cleaning solvent into the rubber storage barrel, activate the body, and clean according to the normal operation of the solvent.

2. if the inlet air is abnormal and there is water vapor, remove the water vapor in the pressure regulation filter or check whether the pressure source is abnormal. before the automatic dispensing machine is used, please try a small amount, master the use of commodity skills, prevent errors, no problem in the experiment, and then use double liquid dispenser or double liquid glue machine for mass production; vacuum suction system vacuum treatment, eliminate the bubbles generated during the mixing process, or use the front station for 10-20 minutes, so that the bubbles generated during the mixing process are mixed in time, the more glue.

please clean the machine regularly to improve its service life. the more glue is mixed, the faster the reaction speed and the faster the curing speed. therefore, according to the specific production situation of reasonable glue, otherwise it will lead to waste of glue. remove accidents, spray machine to improve production efficiency.