several problems that need to be paid attention to in the maintenance of automatic dispensing machine-ag亚洲国际厅

the routine maintenance of the automatic dispensing machine will directly affect the service life of the dispensing machine. the maintenance of the automatic dispensing machine has a great impact on the application of the dispensing machine, including the operation and precautions during normal use. the following is the routine maintenance steps of xinghua dispensing machine, i hope it will be useful to you.

1. replace the glue-coated parts regularly and clean the hose inlet. at this time, mainly close the rubber inlet valve, discharge the residue in the hose, pour the cleaning solvent into the glue storage bucket, restart the dispensing machine, discharge the solvent according to the normal operation process, and complete the valve body cleaning.

2. if the air pressure intake is abnormal, once water vapor is found, please discharge the water vapor in the pressure regulator filter, or check whether the air pressure source is abnormal. before using a lot of glue, please try a small amount of glue, flexible use of product use techniques to prevent mistakes. when there is no problem in testing, complete mass production; the bubbles formed during the mixing process can be removed with a defoaming machine, or can be placed for 10-20 minutes to remove the bubbles generated during the mixing process in time. the greater the amount of glue mixed.

3. please scrub the position of the equipment regularly to improve the service life of the automatic dispensing machine. the more glue, the faster the reaction, the faster the curing speed, the glue should be scientifically standardized according to the specific production conditions to avoid glue waste. eliminate accidents and improve work efficiency. at present, liquid control technology and dispensing equipment have been widely used in various production fields of modern industrialization.

4. when the equipment is not used for a long time, the power switch should be unplugged, which can not only extend the service life of the equipment, but also save a lot of electricity. with the rapid development of the automatic control industry, liquid control technology and automatic dispensing machines are also rapidly developing to extremely high precision control. diversify and systematize.

warm tips: the automatic dispensing machine is cleaned after each use, wipe with alcohol, the best running position is to point oil, keep wet, if the glue valve is not used for a long time, it must be cleaned and perfect, otherwise condensation in the dispensing machine, the machine will be particularly troublesome.